VirtIT

etc/udev/rules.d/70-persistent-net.rules

# This file was automatically generated by the /lib/udev/write_net_rules
# program, run by the persistent-net-generator.rules rules file.
#
# You can modify it, as long as you keep each rule on a single
# line, and change only the value of the NAME= key.

# PCI device 0x1969:0x1091 (alx) MB - DMZ
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="94:de:80:bd:82:d7", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"

# PCI device 0x10ec:0x8168 (r8169) 1 - Agence A
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="10:fe:ed:05:f3:af", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth1"

# PCI device 0x8086:0x107d (e1000e) 2 - Agence B
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:15:17:be:2f:4e", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth2"

# PCI device 0x10ec:0x8169 (r8169) 3 - 
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="64:66:b3:04:02:55", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth3"

# PCI device 0x10b7:0x9200 (3c59x) 4 - ADSL
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:01:03:49:b7:87", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth4"

/etc/network/interfaces

# network interface settings; autogenerated
# Please do NOT modify this file directly, unless you know what
# you're doing.
#
# If you want to manage part of the network configuration manually,
# please utilize the 'source' or 'source-directory' directives to do
# so.
# PVE will preserve these directives, but will NOT its network
# configuration from sourced files, so do not attempt to move any of
# the PVE managed interfaces into external files!

auto lo
iface lo inet loopback

iface eth0 inet manual

iface eth1 inet manual

iface eth2 inet manual

iface eth3 inet manual

iface eth4 inet manual

#DMZ
auto vmbr0
iface vmbr0 inet static
	address  10.0.0.10
	netmask  255.255.255.0
	bridge_ports eth0
	bridge_stp off
	bridge_fd 0


#Agence A
auto vmbr1
iface vmbr1 inet manual
	address  192.168.65.10
	netmask  255.255.255.0
	bridge_ports eth1
	bridge_stp off
	bridge_fd 0

#Agence B
auto vmbr2
iface vmbr2 inet manual
	address  192.168.66.10
	netmask  255.255.255.0
	bridge_ports eth2
	bridge_stp off
	bridge_fd 0

#Libre
auto vmbr3
iface vmbr3 inet manual
	bridge_ports none
	bridge_stp off
	bridge_fd 0

#ADSL PPPOE
auto vmbr4
iface vmbr4 inet manual
	bridge_ports eth4
	bridge_stp off
	bridge_fd 0